If your project calls for industrial pipe fittings, you may have several choices to consider. It may depend on weather, materials you need to move, and other conditions. Here are some of the fitting selections you could have with important information about them.
Push-on
Some industrial pipe fittings are made to slip on pipe to make the connection. You can buy these fittings made from ductile iron or PVC. However, if you have high-pressure systems, push-on fittings are not recommended because they may fail at pressures above 235 pounds per square inch. However, they are an excellent choice for irrigation systems.
Solvent Weld
One of the easiest and most popular kinds of industrial pipe fittings is the solvent weld types. They are made from strong and sturdy PVC and when you apply a solvent adhesive, the pipe and fittings weld together. These fittings are used in a wide range of PVC pipe sizes and are made in diameters as large as twenty-four inches. Solvent weld fittings are quick and easy to install, but un-installing is not usually possible.
Flanged
Flanged iron is a common fitting used in water treatment applications. Some have cement linings and an epoxy coating to ensure a proper seal. They can withstand the harsh environments of many water treatment facilities.
Mechanical Joint
MJ fittings can be used with PVC or ductile iron pipe. They are compression joint fittings with a bell, gland, and gasket. They are joined together by bolts and nuts. They work well for underground applications where the earth may shift over time. It is easy to install these joints, and they are long-lasting.
More Choices
Talk to your industrial pipe fittings supplier today about other options like butt-fusion, electro-fusion, and tapping saddles. They can help you select the best fittings for all your applications.
