Dewatering is the act of removing groundwater or surface-level water. There are a couple of different ways to accomplish this. You may need to use either the evaporation method or a pump to remove all water. Yet there is much more to the process. Find out if you will need dewatering equipment for your next construction project.
More on the Background
Dewatering addresses the presence of accumulated water. This water usually poses some challenges to the construction process. Therefore it needs to be removed to make the site suitable for building. Sites that have a high-level water table or that experience water entering trenches usually need dewatering equipment. In addition, water can seep into areas that have been recently excavated. Dewatering can be used in these areas as well. Overall, dewatering gives work crews a clean, safe workspace to complete the project.
The Problem With Pumping
Traditionally work crews have used pumps to remove standing water. The problem that arises is where to put the excess water. If this water is deposited in an inappropriate area it could cause unnecessary erosion. Therefore, a construction crew has to plan ahead before using a pump. Water should only be transported to another body of water or a sewer system.
Other Things to Know
If you are considering using dewatering make sure you know these additional tips. In most cases, you need to use a buffer made of wood to control the process. Also, be sure to perform dewatering in dry weather. Finally, check the water for the presence of other substances which may need to be removed.
For more assistance with dewatering, contact Aqua-Zyme Disposal Systems Inc. at aqua-zyme.com.